+359 879 201 665 / +359 886 098 835
Home »Equipment »Equipment »NP HARD CASE PARRA - 9195-D
This product is out of stock.
Manufacturer:Product #:
Exterior Dimensions:Interior Dimensions:Weight inc. Foam:Weight exc. Foam:
797.0 mm x 518.0 mm x 313.0 mm737.0 mm x 457.0 mm x 273.0 mm11.50 kg10.00 kg

IP67 Water/ Dust Protection
Chemical Resistant
Pressure Relief Valve (Flight Approved)
Air Checked Approved (L+H+W<275 cm)
Stackable Design


Exterior Dimensions - 797.0 mm x 518.0 mm x 313.0 mm
Interior Dimensions - 737.0 mm x 457.0 mm x 273.0 mm
Lid | Base Dimensions - 47.0 mm | 226.0 mm

Capacity – 91.95 l
Weight (inc Foam | exc Foam) - 11.50 kg | 10.00 kg


Case/ Lid - Polypropylene
O-Ring - EPDM
Handle & Hinge Pins – Stainless Steel
Wheel Bearings – Bearing Steel
Foam – Polyurethane


Padlock Eyelets – (x4 8 mm)
Retractable Drag Handle
Compression Latches (x7)
(x4) In-Line Wheels for ease of movement
Stay Open Hinge Design


Pick & Pluck Foam Dimensions
Sheet Size – 73 cm x 46 cm x 5 cm
Sheet Qty – 4
Total P&P area – 73 cm x 46 cm x 20 xm
PnP Square Size – 1.5 cm2

+ See more
Products from same category
LED Type: Ultra bright CREE XP-G2 LED with max output of 320 ANSI lumens and a life span of up to 50,000 hrs
Battery: 1x 16340 (supplied free) with PCB protection or 1x CR123A (but do not recharge)
Charging: USB charging via a patented magnetic charging point.
Charging Time: Depends on battery capacity. Formula is:
Charging Time = (battery capacity / 500 mA) + 0.5hrs
Function: There are 3 light modes and 1 flashing strobe mode.
Switch: Single button operation; a protruding forward clicky switch for momentary-on, constant-on, off, mode selection and strobe.
Memory Function: The RS16 has a memory function that remembers the last mode you used. So, for example, if you need low level light, you can set the torch to activate in low mode - with both momentary-on and constant-on. A very intelligent feature!
Performance: The XP-G2 LED delivers a lot of bright light (320 ANSI lumens) and is an efficient performer due to the digitally regulated output, which maintains constant brightness.
Protection: Reverse polarity protection circuit protects against incorrect insertion of batteries. Sealed with O-rings for excellent water resistance and improved service life. Waterproof to 2 metres and Dust Resistant to IPX-8.
Tactical: A stainless steel crenellated bezel at the front is removable. The single button system user interface provides complete, one-handed control over light modes and fast access to strobe. The removable clip allows the torch to be clipped onto webbing, a tactical vest or Police stab vest.
Dimension: 104.5mm (Length), 24mm (Head), 26.4mm (Body)
Weight: 90g (without battery).
Finish: Tough, sealed body with HA Type III anodising.
Colour: Gun Metal Grey
Reflector: Orange peel to provide a smooth, flawless beam and good throw.
Lens: Toughened, ultra clear glass