+359 879 201 665 / +359 886 098 835
Home »Equipment »Equipment »NP BATTLE PRO'S - BLACK FRAME / SMOKED LENSE
NP BATTLE PRO'S - BLACK FRAME / SMOKED LENSE
This product is out of stock.
Manufacturer:Product #:
WE Europe0519035
Description
  • Anti-Fog
  • Anti-Scratch Lense
  • Elastic headband
  • UV400 Protection
  • Includes protective sleeve
  • Conforms to CE EN166 standards

+ See more
Products from same category
NP BATTLE PRO'S - TAN FRAME / CLEAR LENSE
  • nti-Fog
  • Anti-Scratch Lense
  • Elastic headband
  • UV400 Protection
  • Includes protective sleeve
  • Conforms to CE EN166 standards

    EN


    MAINTENANCE OF EYE PROTECTOR


    This eye protection should be stored away from direct sunlight and abrasive chemicals.


    The lens should be cleaned with a soft cloth and water.


    This eye protection can be disinfected with any common household disinfectant.


    This eye protection should be inspected frequently and replace worn, pitted or damaged parts.



    FRAME MARKING


    The marking on the frame shows:


    "Identification of the distributor/maker” "Number of the EN standard" “Fields of Use” "Symbol for Impact resistance (see below)" "Certification Mark"




    Fields of Use


    NONE - General use


    3 - Liquid droplets or splashes


    4 - Large dust particles > 5 μm


    5 - Gases and small dust particles < 5 μm


    8 - Short circuit electric arc


    9 - Molten metal and hot solids



    Impact Resistance (Mechanical Strength)


    F - Low energy impact resists a 6mm, 0.86g ball at 45m/s


    B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s


    A - High energy impact resists a 6mm, 0.86g ball at 190m/s


    S – Increased strength


    Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.



    LENS MARKING


    The lens is marked as follows:


    “Lens filter type” “Lens scale number” “Identification of the distributor/maker” “Optical class” “Impact resistance (mechanical strength)” “Certification Mark” “Other marking”



    Filter Type


    2/2C - UV (2C doesn’t affect colour recognition)


    4 – IR Filter


    5/6 - Solar Filter


    Lens Scale Number


    2.1,2/3.1,2 – Indicates this eyewear is intended for use with UV filter (with or without


    good colour recognition) up to a scale number of 2-1.2 or 3.1,2 (goggles only)


    1.2 - Clear or Amber


    1.4 - Blue or I/O Waterproof


    1.7 - Minimises or I/O


    2.5 - Grey or Revo


    3.1 - Dark Grey or Mirror



    Optical Class


    1 – Indicates class 1 optical quality (High Quality)


    2 – Indicates class 2 optical quality


    Impact Resistance (Mechanical Strength)


    F - Low energy impact resists a 6mm, 0.86g ball at 45m/s


    B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s


    A - High energy impact resists a 6mm, 0.86g ball at 190m/s


    S – Increased strength


    Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.



    Other Markings


    K - Resistant to surface damage by fine particles


    N - Resistant to fogging


BGN24.90
NP BATTLE PRO'S - CAMO FRAME/ YELLOW
Anti-Fog
Anti-Scratch Lense
Elastic headband
UV400 Protection
Includes protective sleeve
Conforms to CE EN166 standards


EN
MAINTENANCE OF EYE PROTECTOR
This eye protection should be stored away from direct sunlight and abrasive chemicals.
The lens should be cleaned with a soft cloth and water.
This eye protection can be disinfected with any common household disinfectant.
This eye protection should be inspected frequently and replace worn, pitted or damaged parts.

FRAME MARKING
The marking on the frame shows:
"Identification of the distributor/maker” "Number of the EN standard" “Fields of Use” "Symbol for Impact resistance (see below)" "Certification Mark"


Fields of Use
NONE - General use
3 - Liquid droplets or splashes
4 - Large dust particles > 5 μm
5 - Gases and small dust particles < 5 μm
8 - Short circuit electric arc
9 - Molten metal and hot solids

Impact Resistance (Mechanical Strength)
F - Low energy impact resists a 6mm, 0.86g ball at 45m/s
B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s
A - High energy impact resists a 6mm, 0.86g ball at 190m/s
S – Increased strength
Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.

LENS MARKING
The lens is marked as follows:
“Lens filter type” “Lens scale number” “Identification of the distributor/maker” “Optical class” “Impact resistance (mechanical strength)” “Certification Mark” “Other marking”

Filter Type
2/2C - UV (2C doesn’t affect colour recognition)
4 – IR Filter
5/6 - Solar Filter
Lens Scale Number
2.1,2/3.1,2 – Indicates this eyewear is intended for use with UV filter (with or without
good colour recognition) up to a scale number of 2-1.2 or 3.1,2 (goggles only)
1.2 - Clear or Amber
1.4 - Blue or I/O Waterproof
1.7 - Minimises or I/O
2.5 - Grey or Revo
3.1 - Dark Grey or Mirror

Optical Class
1 – Indicates class 1 optical quality (High Quality)
2 – Indicates class 2 optical quality
Impact Resistance (Mechanical Strength)
F - Low energy impact resists a 6mm, 0.86g ball at 45m/s
B - Medium energy impact resists a 6mm, 0.86g ball at 120m/s
A - High energy impact resists a 6mm, 0.86g ball at 190m/s
S – Increased strength
Please Note: If the impact letter is NOT followed by the letter “T”, then the eye protection shall only be used at room temperature and NOT extreme temperatures.

Other Markings
K - Resistant to surface damage by fine particles
N - Resistant to fogging
BGN19.90