+359 879 201 665 / +359 886 098 835
Home »Airsoft »Airsoft Batteries and Charges (24 products)

Our latest high-performance battery charger is suitable for all airsoft needs. Packed full of great features designed to save you time, preserve the life of your batteries and ensure total safety, this high-quality charger is hard to beat.

Fully programmable and able to store up to ten preset charging programs, the A680 features multiple charging to ensure peak performance. Sophisticated systems prevent over charging and the A680 is especially safe, utilising an internal independent battery balancer and adaptable to most lithium battery types such a LiPo, Lilon, LiFe and LiHV. The A680s optimised operating software also boasts an AUTO function able to set the feeding current during the charging and discharging process, preventing potentially dangerous overcharging when using lithium batteries.

As our most powerful and safest charger from ActionSportGames to date, the A680 is capable of handling massive power loads and is even able to act as an equipment power source of up to 80 watts. Whether used as a charger or as a power supply the A680 stays at optimal temperature using its smart and efficient cooling system, blasting air over an aluminium heat sink from an 8000rpm cooling fan. Included with the A680 charger are a power cable, XH adapter and cable, mini Tamiya plug cable, T-Plug cable, and instructional manual.


  • Suitable for all current battery types: LiPo,
  • Li-ion, LiFe, NiCd, NiMH, PB and also new generation LiHV
  • Capable of operating as a power supply with a maximum output of 80 watts
  • AGM & Cold Charge Modes for PB Batteries  
  • Repeak charge mode
  • Fast charge and long-term storage charge modes
  • Delta Peak Sensitivity for NiMH/NiCd batteries
  • Smart & Efficient Cooling System  
  • Blue lit LCD display
  • Battery meter to check voltage and internal battery resistance
  • Customisable capacity and charging limits  
  • Optimised operating software  
  • Stores up to ten different charge/discharge profiles  
  • Internal independent lithium battery balancer

11.1V Stock tube battery.
Designed to be small enough to fit in 95% of stock tubes. Despite its small size it still packs 900mAh.
The biggest reasons to use a LI-PO is its smaller size and better power efficiency. Most LI-PO batteries are about the same size as a mini-type battery and is equal in power to a large type NiMH battery. No need for battery slings, battery boxes, or big batteries strapped on to guns. LI-PO is a power source for small carbines, PDW's, SMG's, etc. that doesn't require you to spoil the look of the gun, or run the risk of running out of power in the middle of a battle.
Unlike traditional batteries, LI-PO gives a stable Rate of Fire, throughout its use. In addition, it is not necessary to discharge LI-PO batteries before charging them, allowing the battery to be topped off in-between games.

Battery specs:

  • Configuration: one block.
  • Voltage: 11.1V.
  • Capacity: 900mAh.
  • 15C Continuous discharge rate.
  • Comes with align balance connector.
  • Replaces a 10.8V to 12V NiMH pack.
  • Ultra-advanced LI-PO battery technology.
  • L:90mm W: 18mm H: 17mm

To prolong the life of a LI-PO battery:
Never completely discharge the battery.
Stop using the battery the moment you hear the Rate of Fire goes down.
Charge the battery before storage.
IMPORTANT: you must use a LI-PO charger, no exceptions.

When using LI-PO batteries in upgraded AEG's, it is advisable to have a total upgrade, including spring, cylinder-parts, gears and motor. Simply installing a more powerful spring, and then using a high voltage battery to power, the AEG will wreck one or more components in your gearbox.

Loading ...